search-loading

Type ARK2

To be used in ventilation systems and rooms of buildings in case of over pressure risks.


 

  • This pressure relief damper is used where a risk of over pressure exists.
  • Its opening pressure difference is set at the factory.
  • For dampers up to a width of 600 mm, the opening pressure difference is 50 – 1,000 Pa. For dampers > 600 mm, the maximum is 600 Pa.

Pressure relief dampers are used in ventilation systems and rooms of buildings in case of overload-risk. If a defined opening pressure difference is exceeded, the blades open automatically a cross section to discharge the pressure. Pressure peaks, e. g. resulting from fast-closing fire dampers or shut-off dampers, will thus be relieved reliable. The locking of the blades in the closed position is realised via factory-set permanent magnets.

Permitted installation orientation: horizontal.

Downloads Group Type Ident-No. Type / Size
         
ARK · ARK1 · ARK2 Non Return Dampers, Pressure Relief Dampers Technical Leaflet 3/5/EN/3 PDF / 326 KB 

Installation examples

This is how well weather-resistant louvres fit into the facade.
Shut-Off Devices

Contact

TROX Middle East (LLC)

P.O. Box No. 31432
19 Street
Al Quoz Industrial Estate #3
Dubai
United Arab Emirates
Tel.: +971 4 3417448

Contact and locations