Air grilles

Product Finder

layer

ASW

Hit and miss damper with airflow straighteners

  • Nominal sizes 225 × 75 to 1225 × 325 mm
  • Perimeter angle section frame

read more

layer

X-GRILLE Basic

The new X-GRILLE Basic ventilation grilles with their gently sloped border combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 19 – 2651 l/s or 68 – 9544 m³/h
  • Energy-efficient and acoustically optimised air discharge
  • Symmetric blade profile for two-way entry flow
  • Uniform look and easy adjustment due to concealed blade linkage
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs
  • Use of existing rear assemblies
  • Easy replacement of existing grilles due to standard installation dimensions


Optional equipment and accessories

  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing
  • Spring clip fixing

read more

layer

AGW

Damper units with opposed action blades

  • Nominal sizes 225 × 75 – 1225 × 525 mm
  • Perimeter angle section frame

read more

layer

AT

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 23 – 2000 l/s or 83 – 7200 m³/h
  • Grille face made of aluminium with anodised finish
  • Front border, 23 mm or 27 mm wide
  • Concealed screw fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control
  • Spring clip fixing

read more

layer

AGS

Ventilation grille with angled blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 4 – 535 l/s or 14 – 1926 m³/h
  • Grille face made of aluminium with anodised finish
  • 30 mm wide front border
  • Countersunk holes


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Matching rear frame for door installation

read more

layer

EF

Grille cores with special profiled blades

  • Nominal sizes 245 × 95 – 1245 × 445 mm
  • Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
  • Grille core made of aluminium with anodised finish
  • Straight (0°) or angled (15°) air discharge

read more

layer

AF

Single ventilation grilles and horizontal run sections with special profiled blades

  • Nominal sizes 225 × 75 – 1225 × 425 mm and horizontal run sections
  • Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
  • Grille face made of aluminium with anodised finish
  • Front border suitable for floor installation without an installation subframe
  • Removable grille core with special spring clip fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Attachments for volume flow rate balancing and air direction control

read more

layer

TRS-K

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 to 1225 × 325 mm
  • Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
  • Grille face made of galvanised sheet steel
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control

read more

Please select your disired product properties:
Hit and miss dampers, made of sheet steel, for installation into rectangular ducts Type ASW

ASW

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts

read more

Ventilation grilles with flat border construction – also for continuous horizontal runs Type X-GRILLE Basic

X-GRILLE Basic

Ventilation grilles with flat border construction – also for continuous horizontal runs

read more

Damper units, made of dip coated sheet steel, for installation into rectangular ducts Type AGW

AGW

Damper units, made of dip coated sheet steel, for installation into rectangular ducts

read more

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades Type AT

AT

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades

read more

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades Type AGS

AGS

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades

read more

Grille cores made of aluminium, with fixed horizontal blades Type EF · EFG

EF

Grille cores made of aluminium, with fixed horizontal blades

read more

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs Type AF

AF

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts Type TRS-K (duct installation)

TRS-K

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts

read more

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs Type X-GRILLE Cover

X-GRILLE Cover

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades Type TR

TR

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades

read more

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs Type AH

AH

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs

read more

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades Type AWT

AWT

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades

read more

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades and diffuser-type front border Type ASL

ASL

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades and diffuser-type front border

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades and diffuser-type front border – also for horizontal runs Type SL

SL

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades and diffuser-type front border – also for horizontal runs

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts Type TRS-R (circular duct installation)

TRS-R

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts

read more

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts Type DGW

DGW

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts

read more

Ventilation grilles, made of aluminium, with individually adjustable, vertical blades Type VAT

VAT

Ventilation grilles, made of aluminium, with individually adjustable, vertical blades

read more

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades Type TRS

TRS

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades

read more

Next" data-pagination-prev="Prev" data-pagination-source="product-finder-results">

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449