Application
• Filter cartridge for the adsorption of gaseous odorous substances and contaminants as well as hydrocarbons or traces of inorganic compounds from the supply and recirculated air
Special characteristics
• Cylinder with profiled base and cover plates
• Upon request, filter cartridges can be provided with impregnated carbon types for special applications and operating conditions, e.g. for the adsorption of sulphur and chlorine compounds
Construction
• PLA: Casing made of plastic
• GAL: Casing made of galvanised steel
• STA: Casing made of stainless steel
Useful additions
• Mounting plates (MP)
• Universal casing (UCA)
Construction features
• 3-point bayonet fixing
• Flat seal as standard
• Activated carbon sticks
• Casing made of plastic, galvanised sheet steel, or stainless steel
Parameter | Value | Method |
CTC (carbon tetrachloride adsorption) [%] | > 60 | ASTM D3467 |
Toluene adsorption [%] | > 14 | – |
Water content [%] | < 3 | ASTM D2867 |
Ash content [%] | ~ 8 | ASTM D2866 |
Compacted dry density [g/l] | 480 – 500 | ASTM D2854 |
BET surface [m²/g] | > 1100 | BET-N2 |
Hardness [%] | > 99 | ASTM D3802 |
Iodine number [mg/g] | > 99 | ASTM D4607 |
Ignition point [°C] | > 375 | ASTM D3466 |
Pellet diameter [mm] | 3 | – |
Max. operating temperature [°C] | 50 | – |
Maximum relative humidity [%] | 70 | – |
Specification text
Activated carbon filter cartridges for the adsorption of gaseous odorous substances and contaminants as well as hydrocarbons or traces of inorganic compounds from the supply and recirculated air. Easy fitting and secure sealing due to 3-point bayonet fixing. Activated carbon filter cartridges available in lengths of 250, 450 and 600 mm. Flat seal as standard.
Special characteristics
• Cylinder with profiled base and cover plates
• Upon request, filter cartridges can be provided with impregnated carbon types for special applications and operating conditions, e.g. for the adsorption of sulphur and chlorine compounds
Materials and surfaces
• Activated carbon sticks
• Casing made of plastic, galvanised sheet steel, or stainless steel
Construction
• PLA: Casing made of plastic
• GAL: Casing made of galvanised steel
• STA: Casing made of stainless steel
Sizing data
• Noxious gas
• Volume flow rate [m³/h]
• Contact time [s]
• Differential pressure [Pa]
• Nominal size [mm]
ACFC | – | PLA | / | 145 × 450 | ||||||
| | | | | | ||||||||
1 | 2 | 3 |
2 Construction
PLA Casing made of plastic
GAL Casing made of galvanised steel
STA Stainless steel casing
3 Nominal size [mm]
D × H
Construction | Plastic casing |
Nominal size | 145 × 450 mm |
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449