Application
Special characteristics
Operating modes
Parts and characteristics
Attachments
Expansion modules are factory mounted or can be fitted at a later stage
Useful additions
Construction features
Materials and surfaces
Volume flow rate consolidated signal
The adapter module consolidates signals from all connected controllers and provides this consolidated signal as a voltage signal; with expansion modules EM-LON and EM-BAC-MOD-01 the signal is provided as network variable. Supply air and extract air signals are considered.
Variable volume flows
Constant volume flows
Room management function
Supply voltage | 24 V AC ± 15 %; 230 V AC as option; 50/60 Hz |
Power rating | 35 VA fume cupboard controller with control panel; 29 VA room controller; 33 VA room controller with room control panel; max. 40 VA with all expansion modules |
Micro fuse | 2 A, slow blow, 250 V |
Actuator | Fast-running high-precision actuator, running time for 90° is 3 s |
Operating temperature | 10 – 50 °C |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 20 |
EC conformity | EMC according to 2014/30/EU |
Weight | 1.4 kg |
Recovery time | 500 ms |
2 interfaces for communication line | Network cable SF-UTP, 300 m max.; up to 24 devices |
2 interfaces for control panels | Network cable SF-UTP, 40 m max. |
6 digital outputs | Relay with make/break contact, 250 V, 8 A; switch-on current 12 A |
6 digital inputs | for volt-free switch contacts; can be configured as make or break contacts |
5 analog inputs | 0 – 10 V, input resistance > 100 kΩ, characteristic can be configured |
4 analog outputs | 0 – 10 V, 10 mA max., characteristic can be configured |
Adapter module for the EASYLAB system as an interface between fume cupboard control and room control
Control electronics using a microprocessor, with configuration settings stored in EEPROM memory and hence safe in case of a power failure.
Connections for all important communication and peripheral devices are located on the outside of the casing and hence easily accessible. Indicator lights on the outside of the casing for alarms (on both sides), controller function (heartbeat), and communication.
Communication system with plug-in communication lines, automatic connection setup without manual network configuration, easy to expand with additional controllers (usually without integration issues).
Integration of variable or constant volume flow rates in the room balance using analog signals, switch contacts or constant values. Signalling of volume flow rate consolidated signals, faults, and status messages to central BMS with analog or switch outputs.
5 analog inputs for the integration of variable volume flows.
6 volt-free digital inputs for the integration of constant flows and/or the control of special functions.
Analog output for signalling the total volume flow rate of the room (supply air or extract air)
Digital output for an alarm; alarm conditions can be configured.
Supply voltage 24 V AC
Special characteristics
Materials and surfaces
Additional functions with active room management function
This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.
Order example: TAM/T/LAB
Expansion modules | EM-TRF for supply voltage |
LAB | Extract air led system |
Application
Central interface point for room functions
Centralised configuring of the room parameters and functions
Monitoring of room functions
Configurable consolidated alarms
Use of room control panels
Inputs
5 analog inputs
6 digital inputs
Outputs
1 analog output
1 digital output
Expansion modules as interfaces to the central BMS
The following operating values and fault messages of the adapter module are transferred via the network:
In addition, extract air or supply air volume flows can be permanently integrated into the room balance.
Installation and commissioning
Control panel features
BE-LCD-01
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449